NEWS ARTICLE
学术动态：Flexible Tactile Sensor System Based on Piezoresistive Layer: Technology and Construction
论文标题：Flexible Tactile Sensor System Based on Piezoresistive Layer: Technology and Construction
发布日期：2026-05-25
作者：Viktor Novák, Jaromír Volf, Roman Hrmo, Petra Kvasnová, Vladimír Ryženko
DOI：10.3390/s26113345
论文摘要：SITSCAN CS is an original tactile system, which was primarily developed to investigate pressure distribution on uneven surfaces, e.g., chairs; however, due to its flexibility and modular conception, it can be utilized in other industrial or medical applications too. It consists of a flexible, PET-based PCB print-made sensing plate with active area of 50 × 50 cm with a placed matrix of 50 × 50 individual sensors. It uses the piezoresistive effect of the conductive ink layer as the transducing technology between the applied pressure and the output electrical signal. The tactile system further consists of control electronic circuits which process the measured data with up to 1000 fps with a maximal possible resolution 80 × 80 sensing points. The acquired data can be visualized, stored and further processed by means of the respective PC control program. The article describes the theoretical basis for the tactile system, as well as its development, construction, technical specifications and the testing process.
元数据：Crossref 收录的 MDPI Sensors 论文。 DOI: 10.3390/s26113345. Vol. 26, Issue 11. Authors: Viktor Novák, Jaromír Volf, Roman Hrmo, Petra Kvasnová, Vladimír Ryženko.
开放许可：https://creativecommons.org/licenses/by/4.0/
原文链接：https://doi.org/10.3390/s26113345
PDF 链接：https://www.mdpi.com/1424-8220/26/11/3345/pdf